The aluminum alloy lift includes a base, a lifting frame fixed on the base, and an operating table fixed on the top of the lifting frame. The four peripheral edges of the operating table are provided with guardrails, and also includes a rotating shaft set on the guardrail for driving the rotating shaft to rotate. The driving device and the elevator are arranged below the rotating shaft. The rotating shaft is rotatably connected to the two opposite sides of the vertical operating table of the guardrail. The pedal and the lifting ropes slidingly connected with the plurality of pedals in sequence from bottom to top, the pedal at the uppermost end is fixedly connected to the side of the guardrail, the upper end of the lifting rope penetrates the uppermost pedal and is wound around the rotating shaft, and the lower end and the lowermost end of the lifting rope The pedals are fixedly connected. During the construction process, the staff can get on and off the operating table without lowering the operating table.
Single mast and double mast aluminum alloy lift tables require a custom hydraulic pump station to ensure the service life of the product. The pump station includes an oil pump, an AC motor and a pump body located on the right side of the single-column aluminum alloy. The pump body of the lift table is located at the bottom of the aerial work platform, which does not take up a lot of space. The right end is linked with a fuel tank. The front part is provided with a one-way valve and an oil outlet to provide the lifting power for the lift table, and the rear part is provided with a pressure regulating valve. Before using the aluminum alloy lift table, pay attention to whether the pressure of the pressure regulating valve is appropriate. If the valve is opened too small, it is easy to burn the motor. The upper end of the aluminum alloy lifting platform pumping station is respectively equipped with an electromagnetic check valve, a speed regulating valve and an emergency valve. Pumping stations dedicated to aluminium single mast and double mast lifts require special machining to ensure a good service life. The aluminum alloy lifting platform is controlled by the oil return solenoid valve to control its own weight and fall back, and is equipped with a descending speed control valve and a manual emergency descending valve. The product has reliable performance, light and reasonable structure, easy to use, easy to handle, low price, good stability, and maintenance. It is convenient and one of the best choices for working at heights within 10m.
Issiq teglar: 8 meter single mast aluminum lift platform, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
